Digitrax Zepher Xtra
Run up to 20 throttles at the same time on your system.
Jump Ports for using DC power packs as additional throttles
Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
Simple, cost effective way to add more throttles to your Zephyr Xtra set.
Makes it easy to share the fun of DCC with layout visitors and young operators.
Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses
Use Address 00 to run one or more locos without DCC decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing-use the number painted on your engines as its address.
3.0 Amps of Power to run multiple trains.
Booster outputs 13V DC for safe operation in N and HO scales.
Control for 30 functions (F0Fwd, F0Rev and F1-F28)
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting
Access to stationary decoder control for turnouts and other devices.
Control 999 stationary decoder addresses.
Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
Advanced consisting, allows only advanced consist capable mobile decoders.
Basic consisting, program decoders to run on same address.
Built in read/write programmer that can read and write all CVs.
Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
Operations mode programming can be used to program decoders on the layout.
Blast Mode Programming for Sound
Expandability with Digitrax LocoNet
Use Zephyr Xtra as a starting point for your Digitrax LocoNet System, then add components.
Use Zephyr Xtra as an expansion set with Digitrax equipment you already have installed.
Add Radio or IR via LocoNet. Just plug in a UR90, UR91 or UR92 receiver and add IR and/or Radio throttles.
Turnout List/Route capability to simplify complex yard operations.
EZ routes button for simplified Command Station route programming
Customizable System Options
Turn audible warnings on or off.
Set up purging options.
Multi-format command station mode.
Loco Reset button for easy system purging
UP5 Universal Panel
Makes LocoNet hook up simple!
2 LocoNet jacks for hooking up your LocoNet network.
3 throttle jacks for hooking up throttles and other non-RailSync devices.
Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
DCS210 comes with 3 LocoNet ports for Easy expandability
Other Advanced Features
IPL updatable firmware for continued product improvements
Device Query and Device Statistics to help with troubleshooting
Input Mode to help set up detection on your layout
Uses Expanded slots